Adtran L128 Manual Do Utilizador
Chapter 3: Terminal Menu Operation and Structure
48
Express L128/L128T User Manual
61202.070L1-1
IPX/Frame Type
Write security: 2; Read security: 5
The Express L128/L128T supports all four defined IPX frame types. The pos-
sible frame types are: Ether Type II (def), Ether 802.3 (Raw), Ether 802.2, or
Ether SNAP
The Express L128/L128T supports all four defined IPX frame types. The pos-
sible frame types are: Ether Type II (def), Ether 802.3 (Raw), Ether 802.2, or
Ether SNAP
(802.2 SNAP). Only one frame type can be used at one time.
IPX/Seed Status
Write security: 2; Read security: 5
The seed status defines what the Express L128/L128T is to do with the net-
work information on the selected frame type during startup. There are three
possible seeding selections specified:
The seed status defines what the Express L128/L128T is to do with the net-
work information on the selected frame type during startup. There are three
possible seeding selections specified:
Seed
- The Express L128/L128T will listen for an IPX network
number being sent by another router (including Novell software
routers residing on servers) on the Ethernet segment connected to
this port and use this number if it exists. If it doesn’t discover a
number in use, the Express L128/L128T will use the configured IPX
network number for the Ethernet segment.
Non-Seed
(def) - The Express L128/L128T will listen for an IPX
network number being sent by another router (including Novell
software routers residing on servers) on the Ethernet segment
connected to this port and use this number if it exists. If it doesn’t
discover a number in use, the Express L128/L128T will wait
indefinitely until a number is sent by another router on the Ethernet
segment.
Auto-Seed
- The Express L128/L128T will listen for an IPX network
number being sent by another router (including Novell software
routers residing on servers) on the Ethernet segment connected to
this port and use this number if it exists. If it doesn’t discover a
number in use, the Express L128/L128T will auto-generate a valid
number using its routing tables.
IPX/RIP Timer
Write security: 3; Read security: 5
This value specifies how often the Express L128/L128T sends out IPX RIP
packets on the network segment attached to the Ethernet port. The RIP pack-
ets sent contain routing information about the networks for which this Express
L128/L128T is responsible. The default value is 60 seconds.
This value specifies how often the Express L128/L128T sends out IPX RIP
packets on the network segment attached to the Ethernet port. The RIP pack-
ets sent contain routing information about the networks for which this Express
L128/L128T is responsible. The default value is 60 seconds.