Netopia 3347-02-ENT Folheto

Broadband Without Boundaries®

 

1.

 

• Place it in a spot that is easily accessible for you.

• You can lay it flat or mount on the wall.

• Keep the cords away from other electrical devices that may interfere with the operation of your Router.

• Be sure that the antenna is in the vertical position.

 

2.

 

3.

 

4.

 

5.

 

Wait for the DSL Sync light on the front of the Router to turn solid green. This could take up to two minutes.

When all of your connections are made, your network may look like this.

 

When all of your connections are made, the status LEDs on the front of your Netopia Router will light, 

according to the following diagram:

Netopia Routers serve Dynamically-assigned IP addresses by default. Be sure to configure each computer 

connected to your Netopia Router to accept a Dynamically-assigned IP address, commonly referred to as 

DHCP .

If you need instructions, refer to your computer’ s operating system documentation for information about 

DHCP configuration.

Your service provider will supply you with several parameter values. Access the confi

guration screens as follows:

Run a Telnet application from the computer on the same network as the Router

.

•

Windows users click on the 

 

 menu, select 

 

, and in the resulting entry box, type 

“

 

telnet 192.168.1.1

 

" (without the quotes).

•

Macintosh OS X users launch the 

 

 application, either from the Dock or from the Utilities folder, and 

type “

 

telnet 192.168.1.1

 

" (without the quotes).

The Telnet window displays the 

 

. 

2

Flashes 

 when there is

activity on the LAN.

Solid 

 when connected.

 when pow

er is on.

Flashes 

 when there is

activity on the wireless LAN.

Solid 

 when Internet

connection is established

Solid 

 when Router is connected.

Flashes 

 when transmitting or

receiving data on the W

AN port.

3

4

 

In the Telnet screens, move from field to field with the 
arrow keys. Select items with the 

 

 key, and tog-

gle items with the 

 

 key followed by 

 

.

Select 

 

 and press 

 

.

The 

 

 screen appears. 

Your service provider must provide appropriate settings 
for this screen.

Make any changes that your service provider requires or 
simply accept the defaults. Select 

 

 and 

press 

 

.

The 

 

 screen 

appears. 

Your service provider must provide appropriate settings 
for this screen.

Make any changes that your service provider requires or 
simply accept the defaults. Select 

 

 and 

press 

 

.

The 

 

 screen appears. 

Your service provider must provide appropriate settings 
for this screen.

Make any changes that your service provider requires or 
simply accept the defaults. Select 

 

 and 

press 

 

.

 

Thank you for selecting the Netopia 3347-02-ENT or 3357-02-ENT Extreme Wireless DSL Router. This guide will 
help you set up and configure your network. [FAQs and Troubleshooting Tips are located on the inside pages.]

Check your package contents. It should contain the items shown here:

If you don’t have everything, contact your supplier immediately.

                           Netopia 3347-02 v8.7.0

                     Easy Setup...

                     WAN Configuration...

                     System Configuration...

                     Utilities & Diagnostics...

                     Statistics & Logs...

                     Quick Menus...

                     Quick View...

You always start from this main screen.

                            ADSL Line Configuration

         Trellis Coding Enabled:            On

         Fast Retrain Enabled:              On

         Data Link Encapsulation...         RFC1483
         Annex Modes enabled:               Off
         Data Circuit VPI (0-255):          8
         Data Circuit VCI (32-65535):       35

         PREVIOUS SCREEN                    NEXT SCREEN

                   Connection Profile 1: Easy Setup Profile

         Underlying Encapsulation...        None
         RFC1483 Mode...                    Bridged 1483

         Address Translation Enabled:       Yes
         IP Addressing...                   Numbered

         Local WAN IP Address:              0.0.0.0
         Local WAN IP Mask:                 0.0.0.0

         PREVIOUS SCREEN                    NEXT SCREEN

Enter basic information about your WAN connection with this screen.

                              IP Easy Setup

         Ethernet IP Address:               192.168.1.1
         Ethernet Subnet Mask:              255.255.255.0

         Domain Name:                       isp.com
         Primary Domain Name Server:        0.0.0.0
         Secondary Domain Name Server:      0.0.0.0

         Default IP Gateway:                0.0.0.0

         IP Address Serving:                On

         Number of Client IP Addresses:     100
         1st Client Address:                192.168.1.100

         PREVIOUS SCREEN                    NEXT SCREEN

Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.

1

 

 6180205-00-01

 

Copyright 2007, Netopia, Inc. Netopia, the Netopia logo, and Broadband Without Boundaries are registered trademarks belonging to Netopia, Inc., registered 
U.S. Patent and Trademark Office. All other trademarks are the property of their respective owners. All rights reserved.