EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge Manual Do Utilizador
Version 1.02
50
Professional Installation
Per the recommendation of the FCC, the installation of high gain directional
antenna to the system, which are intended to operated solely as a point-to-
point system and whose total power exceeds +30dBm EIRP, require
professional installation. It is the responsibility of the installer and the end
user that the high power systems are operated strictly as a point-to-point
system.
Systems operating as a point-to-multipoint system or use non directional
antennas cannot exceed +30dBm EIRP power requirement under any
circumstances and do not require professional installation.
antenna to the system, which are intended to operated solely as a point-to-
point system and whose total power exceeds +30dBm EIRP, require
professional installation. It is the responsibility of the installer and the end
user that the high power systems are operated strictly as a point-to-point
system.
Systems operating as a point-to-multipoint system or use non directional
antennas cannot exceed +30dBm EIRP power requirement under any
circumstances and do not require professional installation.
Information to User
The user manual or instruction manual for an intentional or unintentional
radiator shall caution the user that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
radiator shall caution the user that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Declaration of Conformity
Declares that the product:
Date：November 18, 2003
Model Number：Wireless client bridge
Equipment Type：Wireless Access Bridge
Made in Taiwan
Complies with Part 15 Class C of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Date：November 18, 2003
Model Number：Wireless client bridge
Equipment Type：Wireless Access Bridge
Made in Taiwan
Complies with Part 15 Class C of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Version 1.02
51
European Community – CE Notice
Marking by the symbol：
Indicates compliance with the essential requirements of Directive
1999/5/EC. Such marking is indicative that this equipment meets or
exceeds the following technical standards:
1999/5/EC. Such marking is indicative that this equipment meets or
exceeds the following technical standards:
9 EN 300 328-2
9 EN 301 489-1
9 EN 301 489-17
9 EN
9 EN 301 489-1
9 EN 301 489-17
9 EN
60950
Marking by the symbol：
Indicates compliance with the essential requirements of R&TTE Directive
99/5/EC, and the product is permitted to be used in the following EC
countries, including Germany, UK, The Netherlands, Belgium, Norway,
Sweden, Denmark, Finland, France, Italy, Spain, Austria, Iceland,
Ireland, Portugal, Switzerland, Greece and Luxembourg.
99/5/EC, and the product is permitted to be used in the following EC
countries, including Germany, UK, The Netherlands, Belgium, Norway,
Sweden, Denmark, Finland, France, Italy, Spain, Austria, Iceland,
Ireland, Portugal, Switzerland, Greece and Luxembourg.
中華民國交通部電信總局低功率射頻電機型式認證
型式認證標籤式樣：
依據交通部電信總局『低功率輻射性電機管理辦法』第十四條規定，經型式
認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變
更頻率、加大功率或變更原設計之特性及功能。
依據交通部電信總局『低功率輻射性電機管理辦法』第十七條規定，低功率
射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，
應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法
規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療
用電波輻射性電機設備之干擾。
認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變
更頻率、加大功率或變更原設計之特性及功能。
依據交通部電信總局『低功率輻射性電機管理辦法』第十七條規定，低功率
射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，
應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法
規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療
用電波輻射性電機設備之干擾。