IBM 09-0572-000 Manual Do Utilizador

C

HAPTER

 3: U

SING

 

THE

 A

UTO

L

INK

 F

EATURE

 

FOR

 N

ET

W

ARE

■

Logs in to the server and updates the NetWare client 
software if a 3Install account exists on the server; otherwise, 
the client software is installed from the TokenDisk diskette.

■

Modifies the CONFIG.SYS, AUTOEXEC.BAT, and NET.CFG files. 
(The previous versions of these files are renamed 
CONFIG.3CM, AUTOEXEC.3CM, and NET.3CM.)

If you want to configure the adapter manually, see Chapter 4, 
“Standard Installation and Configuration.”

Verify that you meet the following requirements.

■

The 3C619C adapter must be installed in your PC and 
connected to the network. 

■

NetWare on the server must be version 2.2 or later.

■

After running the AutoLink program, you need an account 
on the target NetWare server with an assigned user ID and 
password to log in to the server.

■

A 3Install account on the server allows the AutoLink program 
to download the NetWare client software from the server 
instead of from the TokenDisk diskette. This feature can be 
used to install newer versions of the software or to customize 
your installation.

Installation instructions for creating the 3Install account and 
preparing the server can be found in the 
A:\QINSTALL\SERVER\README.TXT file on the TokenDisk diskette.

■

The AUTOLINK.CFG file can be used to modify the AutoLink 
process. The AUTOLINK.CFG file in the TokenDisk diskette’s 
root directory contains default settings and descriptions of 
the AUTOLINK.CFG parameters.