IBM 09-0572-000 Manual Do Utilizador

The following information is displayed on the screen, 
indicating what to do when the specific test fails.

■

Check the ROM base address setting on the adapter and 
make sure that it is not being used by another device.

■

Run the test three times with a delay of at least 30 seconds 
between each test. If the error persists, power down the PC 
and try once more. 

■

Check the ROM base address setting on the adapter and 
make sure that it is not being used by another device.

■

Refer to the “Configuration Options” section in Appendix B 
for more information.

■

Check the ROM base address setting on the adapter and 
make sure that it is not being used by another device.

■

Run the test three times with a delay of at least 30 seconds 
between each test. If the error persists, power down the PC 
and try once more. 

■

Make sure the RAM base address is aligned according to the 
selected shared RAM size. 

■

Make sure the shared RAM address does not conflict with the 
adapter ROM or another device.