Patton electronic 3120 Manual Do Utilizador

Model 3120 RAS Getting Started Guide

Saving your configuration

Channel assignment
This section describes configuring the RAS so it will know which channels are active. Do the following:

1. Select 

T1/E1 Link

 on the 

Configuration Menu

. The T1/E1 Link Activity window appears (see figure 28 on 

2. Click on 

Channel Assignment

. The WAN Circuit Channel Assignment window appears (see figure 33 on 

3. Click on the 

 button under the 

Set all channels to:

 section. Channels 25 through 30 are ignored for 

T1/PRI lines.

4. Click on 

.

The basic configuration for the RAS is now finished. Do the following to save your configuration settings:

1. Select 

Home

 on the 

Configuration Menu

. The Home window appears (see figure 18 on page 33).

2. Click on the 

Failing to click on the 

 button before 

you power down or reset the RAS will cause your changes to be lost.

3. The Import/Export function enables you to make a backup (or export) copy of your access server’s configu-

ration parameters. By exporting the configurations, the saved files can quickly be loaded (or imported) into 
a replacement access server—greatly speeding up the installation process should an access server need 
replacing.

All actions for Import/Export require superuser access privileges.