Yamaha MD8 Manual Do Utilizador

Página de 115
Combining Songs
67
MD8—Owner’s Manual
Combining Songs
The Song Combine function allows you to combine adjacent songs that were divided using 
the Song Divide function. Songs that were recorded separately cannot be combined (though 
you can select their numbers, the display will tell you 
Can't Combn
 when you press the 
[ENTER] button to confirm the operation).
1. Press the [EDIT] button and use the DATA dial to select the Song Combn 
function.
2. Press the [ENTER] button.
The display shows 
Cmbn
 
Y
.
3. Use the DATA dial to select the first song you want to combine.
4. Use the CURSOR shuttle to make the second song entry flash.
5. Use the DATA dial to select the second song you want to combine.
6. Press the [ENTER] button.
The display shows 
Cmbn EXE?
7. Press the [ENTER] button to combine.
Press the [EXIT] button to cancel.
The songs are combined into one. 
Writing TOC
 appears on the display as the TOC is 
updated.
A marker is added at the point where the songs are combined and existing markers from 
both songs remain valid. 
If the total number of markers including the new marker at the join point exceeds 10, you 
will not be able to access markers above the original Marker number 10. These higher mark-
ers are still stored, however. So if you delete one or more of the first ten markers, they will 
reappear successively.
When songs are combined, subsequent songs are renumbered. For example, Song 1 and 
Song 2 are combined into Song 1. The previous Song 3 then becomes Song 2, and so on.
[S]
[1]
[3]
[4]
[5]
[E]
[2]
Song 1
after combine
Song 1
before combine
Combine Point
Song 2
before combine
[S]
[1]
[E]
[S]
[1]
[2]
[3]
[E]