Yamaha MD8 Manual Do Utilizador
72
Other Functions
MD8—Owner’s Manual
8
Other Functions
Frame Display
The Frame Disp function allows you to choose whether the display counter shows 86 frames
per second, the standard frame count for MiniDisc, or 30 frames per second for when the
MD8 is generating MTC.
per second, the standard frame count for MiniDisc, or 30 frames per second for when the
MD8 is generating MTC.
1. Press the [UTILITY] button and use the DATA dial to select the Frame Disp
function.
2. Press the [ENTER] button.
The display now reads
86 Frame
.
3. Use the DATA dial to select 86 or 30.
4. Press the [ENTER] button.
5. Press the [EXIT] or [UTILITY] button to leave the Utility mode.
Display Dimmer
The Display Dimmer function allows you to set the brightness of the display. Set the value
that best suits your working habits.
that best suits your working habits.
1. Press the [UTILITY] button and use the DATA dial to select the Display
Dimmer function.
2. Press the [ENTER] button.
The display now reads
Dimmer
.
3. Use the DATA dial to set the brightness (1–5).
4. Press the [ENTER] button.
5. Press [EXIT] or [UTILITY] button to leave the Utility mode.
Peak Hold
The Peak Hold function makes the meter segments lit by the loudest signal peaks stay on,
so you can easily check for peak levels. The Peak Hold function can be reset by pressing the
[DISPLAY] button.
so you can easily check for peak levels. The Peak Hold function can be reset by pressing the
[DISPLAY] button.
1. Press the [UTILITY] button and use the DATA dial to select the Peak Hold
function.
2. Press the [ENTER] button.
The display now probably shows
Hold OFF
.
3. Use the DATA dial to set this function to ON.
4. Press the [ENTER] button.
5. Press [EXIT] or [UTILITY] button to leave the Utility mode.