Farallon Communications R9100 Manual Do Utilizador

10. When you are finished configuring the filter, select ADD THIS FILTER NOW to save the filter in the filter set. 

Select CANCEL to discard the filter and return to the Add IP Filter Set screen.

To display a view-only table of input (output) filters, select Display/Change Input Filter or Display/Change 
Output Filter in the Add IP Filter Set screen. 

To modify a filter, select Display/Change Input Filter or Display/Change Output Filter in the Add IP Filter Set 
screen to display a table of filters.

Select a filter from the table and press Return. The Change Filter screen appears. The parameters in this 
screen are set in the same way as the ones in the Add Filter screen (see 

).

To delete a filter, select Delete Input Filter or Delete Output Filter in the Add IP Filter Set screen to display a 
table of filters. 

Select the filter from the table and press Return to delete it. Press Escape to exit the table without deleting the 
filter.

To display a view-only list of filter sets, select Display/Change IP Filter Set in the IP Filter Sets screen.

                                      Change Filter

                      Enabled:                    No
                      Forward:                    No

                      Source IP Address:          0.0.0.0
                      Source IP Address Mask:     0.0.0.0

                      Dest. IP Address:           0.0.0.0
                      Dest. IP Address Mask:      0.0.0.0

                      Protocol Type:              0

                      Source Port Compare...      No Compare
                      Source Port ID:             0
                      Dest. Port Compare...       No Compare
                      Dest. Port ID:              0

Enter the IP specific information for this filter.