Nortel Networks AN/DC Manual Do Utilizador
Installing the AN/DC
312410-A Rev 00
1-13
Once you have the appropriate equipment, complete the following steps:
1.
Refer to the console user manual for instructions.
2.
Power off the console.
3.
Attach the null modem crossover adapter to the 25-pin cable connector
4.
Insert the screws on the cable connector into the receptacle on the
adapter connector and tighten each screw.
adapter connector and tighten each screw.
Figure 1-7.
Attaching the Modem Adapter to the Console Cable
5.
Insert the 9-pin receptacle end of the console cable into the CONSOLE
port on the back panel of the AN/DC
port on the back panel of the AN/DC
.
Table 1-1.
Console Parameters
Parameter
Value
Baud Rate
9600
Data Bits
8
Stop Bits
1
Parity
None
Null modem crossover adapter
Console cable connector
Screw receptacle
Rotate to tighten screw
AN0010A