Nortel Networks AN/DC Manual Do Utilizador
Installing and Operating AN/DC and ANH-8/DC Systems
C-4
312410-A Rev 00
ANH-8/DC Hardware Communications Options
Every ANH-8/DC includes
•
9 Ethernet LAN repeater ports (1 AUI and 8 UTP)
•
2 synchronous wide area network (WAN) ports
•
1 local console service port
With optional upgrades installed, the ANH-8/DC also supports
•
An ISDN basic rate interface (BRI) for direct (without terminal adapter)
connection to the ISDN network
connection to the ISDN network
•
A third synchronous (COM3) port
•
Second Ethernet nonrepeating 10Base-T (UTP-2) port
•
An Ethernet Data Collection Module (DCM) for gathering RMON statistics
summarizes the communications interfaces; the sections that follow
describe each interface in more detail and provide cable and connector
specifications. See Chapter 2 for information and illustrations about the front- and
back-panel cable connections.
specifications. See Chapter 2 for information and illustrations about the front- and
back-panel cable connections.
Note:
The Ethernet repeater ports operate as a single interface. Software
configuration parameters (for example, the port IP address) apply to all ports.
Note:
When using an N11 DCM, the ANH-8/DC requires Router Software
Version 9.00 or later and Site Manager Software Version 3.00 or later.