Nortel Networks NN44200-700 Manual Do Utilizador
116
Chapter 5 Routing and remote access troubleshooting
Step
Action
1
Connect to the CallPilot server using Dial-Up Networking. Use
the NGenDist or NGenSys accounts because these accounts are
enabled for dial-up access. You will need the password for the
account.
the NGenDist or NGenSys accounts because these accounts are
enabled for dial-up access. You will need the password for the
account.
Note: The details of using Dial-up Networking vary depending
on which version of Windows Operating System is running on
the Client PC. Refer to the CallPilot NTPs, Windows Help, or
other Microsoft documentation for details.
on which version of Windows Operating System is running on
the Client PC. Refer to the CallPilot NTPs, Windows Help, or
other Microsoft documentation for details.
2
Right-click the connection icon in the system tray and choose Status
(or just double-click the icon).
(or just double-click the icon).
Result: The RAS Status window appears.
3
To obtain the IP address, select the Details tab and read the Server
IP Address.
IP Address.
4
Click Close on the Dial-Up Networking Status window.
—End—
Nortel CallPilot
Troubleshooting Reference Guide
NN44200-700
01.05
Standard
5.0
26 June 2007
Copyright © 2007, Nortel Networks
.