Nortel Networks NN44200-700 Manual Do Utilizador
Double-Hop remote control
125
6
Uncheck Use default gateway on remote network. Click OK to close
all windows.
all windows.
Result: The warning box appears with the following message:
Since this connection is currently active, some setting
will not take effect until the next time you dial it.
7
Click OK.
8
Disconnect and re-connect to the remote server. The modified
Default gateway setting is now active.
Default gateway setting is now active.
—End—
Notes:
It is possible to use pcAnywhere to control a PC that is in turn connected
into a CallPilot server through Remote Desktop Connection. However, the
right keyboard shift key does not seem to work in this scenario, nor does
the CAPS LOCK key. You must use the left shift key only to type upper
case characters. This is especially important when typing passwords. (This
problem was noted using pcAnywhere 10.5 and 11.01).
into a CallPilot server through Remote Desktop Connection. However, the
right keyboard shift key does not seem to work in this scenario, nor does
the CAPS LOCK key. You must use the left shift key only to type upper
case characters. This is especially important when typing passwords. (This
problem was noted using pcAnywhere 10.5 and 11.01).
Nortel CallPilot
Troubleshooting Reference Guide
NN44200-700
01.05
Standard
5.0
26 June 2007
Copyright © 2007, Nortel Networks
.