Siemens AFI5100 Manual Do Utilizador
Input Point Module (AFI5100)
1
Input Point Module (AFI5100)
Fig. 1
Input Point Module
1.1 Product
Description
The AFI5100 is an Input Point Module used as part of a Siemens integrated access
control and security solution. It provides an interface between an Advanced Access
Controller (ACC) and up to 32 input devices used to monitor a secure facility.
control and security solution. It provides an interface between an Advanced Access
Controller (ACC) and up to 32 input devices used to monitor a secure facility.
The AFI5100 continuously monitors the status of all input devices connected; for
example, Passive Infrared Detectors (PIRs). Any changes in state are instantly
communicated to the ACC and then on to the Host system if necessary.
example, Passive Infrared Detectors (PIRs). Any changes in state are instantly
communicated to the ACC and then on to the Host system if necessary.
1.2 Product
Numbers
6FL7820-8CB10 AFI5100 – Input Point Module and base-plate
1.3 Prerequisites
Input Devices to be connected to the IPM
Cabling (RS-485)
Required Tools & Materials
Medium-duty drill and associated drill-bits (if required)
4 mounting screws or standoffs (approx. 4mm)
Flat-blade terminal screwdriver
Wire cutters
Cable strippers
5
Siemens Building Technologies
Fire Safety & Security Products
02.2005