KYOCERA 3040 Manual Do Utilizador

5-6

Troubleshooting

During copying, is the maximum 
capacity of the optional 
document finisher output tray 
exceeded? 

Remove some pages from the 
optional document finisher and 
press the Start key. Printing 
continues.

—

During printing, is the maximum 
capacity of the optional 
document finisher output tray 
exceeded? 

Remove some pages from the 
optional document finisher and 
press [Continue]. Printing 
continues.

—

Is the maximum capacity of the 
optional document finisher 
output tray exceeded? 

Remove some pages from the 
optional document finisher.

—

Have you selected functions 
that cannot be used together?

Check the settings.

—

Exceeds pre registered copying 
quantity.
(Copy limit for this ID-code has 
been reached.
No copying possible.)

Is the maximum limit for copying 
as specified in Job Accounting 
mode exceeded?

The copy volume has been 
reached the set limit of your 
department. No additional 
copying is possible. Clear the 
copy count in Job Accounting.

Is the optional key counter 
inserted correctly?

Insert the optional key counter 
securely and completely.

—

—

The current copy cannot be 
processed because there is no 
more copy memory free space, 
or the number of original pages 
exceeded the maximum 999 
pages. When the following 
message is displayed select the 
resolution method. 
[Cancel]: Cancels copying. 
[Continue]: Copies up to the last 
scanned page. 

—

—

The toner container will need to 
be replaced soon. Prepare the 
replacement toner container. 

Refer to Operation 
Guide, Chapter 5

—

Remaining toner is low, so only 
one page may be printed at a 
time. Prepare the replacement 
toner container.

Refer to Operation 
Guide, Chapter 5

—

Replace the toner container. 

Refer to Operation 
Guide, Chapter 5

Is the toner container securely 
installed?

Open the front cover and pull 
the toner container out. Shake 
the container well and set back 
in place.

Refer to Operation 
Guide, Chapter 5

Have you cleaned the main 
charger?

Clean the main charger after 
replacing the toner container. 
After cleaning, press [End]. 
Adjustment begins. Wait 5 
minutes.

Refer to Operation 
Guide, Chapter 5

Image cycle.
(Now adding toner.)

—

Toner replenishment is in 
progress. Wait until the process 
is completed.

—

—

Performing internal 
maintenance. Wait until the 
process is completed.

—