Acer Extensa 500 Manual Do Utilizador
Power Management
38
User’s Guide
management system elapses without any system activity
❑
Closing the display cover
❑
When the computer is about to enter Hibernation mode
(e.g., during a battery low condition), but the
Hibernation file is invalid or not present
(e.g., during a battery low condition), but the
Hibernation file is invalid or not present
The following signals indicate that the computer is in
Standby mode:
Standby mode:
❑
The Standby indicator lights
To leave Standby mode and return to normal mode:
❑
Press any key
❑
Move the active pointing device (internal or external, PS/
2 or serial)
2 or serial)
❑
Have the Resume Timer set and let it be matched
❑
Open the display cover
❑
Experience an incoming PC card modem event
Hibernation Mode
In Hibernation mode, all power shuts off (the computer does
not consume any power). The computer saves all system
information onto the hard disk before it enters Hibernation
mode. Once you turn on the power, the computer restores
this information and resumes where you left off upon
leaving Hibernation mode.
not consume any power). The computer saves all system
information onto the hard disk before it enters Hibernation
mode. Once you turn on the power, the computer restores
this information and resumes where you left off upon
leaving Hibernation mode.
Note: If the computer does not enter Standby mode after
pressing the Standby hot key, it means the operating
system will not allow the computer to enter the power-
saving mode.
pressing the Standby hot key, it means the operating
system will not allow the computer to enter the power-
saving mode.
Warning: Unstored data is lost when you turn off the
computer power in Standby mode or when the
battery is drained.
computer power in Standby mode or when the
battery is drained.
500-e.book : 500-2e.fm Page 38 Monday, August 17, 1998 9:36 PM