Fujitsu F2 MC-16 Manual Do Utilizador
302
CHAPTER 2 DEPENDENCE FUNCTIONS
■
Specifications of Sequencer
Table 2.6-2 shows the specifications of the sequencer for this emulator debugger.
■
How to set
Control the sequencer in the following methods:
●
Sequencer
•
Dialog
- Select [Debug] - [Sequence] menu.
For details, refer to "4.6.6 Sequence" in "SOFTUNE Workbench Operation Manual".
•
Command
1. The event is set according to the SET EVENT command.
2. The event set by the SET SEQUENCE command is set as a sequence.
For details, refer to "3.22 SET EVENT(type 2)" or "3.28 SET SEQUENCE (type2)" in "SOFTUNE
Workbench Command Reference Manual".
Workbench Command Reference Manual".
Table 2.6-2 Specifications of Sequencer
Function
Specification
No. of levels
2 levels
Restart function
Available (one)
Conditions of each
event
(Code/data)
event
(Code/data)
Address
Pass count: 1 to 1048575
Attribute: Read/write
Data size: Byte, Word, Long
(Attribute and data size can be specified only for data events.)
Pass count: 1 to 1048575
Attribute: Read/write
Data size: Byte, Word, Long
(Attribute and data size can be specified only for data events.)
Operation when
conditions are met
conditions are met
Level 1: Moves to level 2
Level 2: Terminates the sequencer
Restart: Starts the sequencer
Level 2: Terminates the sequencer
Restart: Starts the sequencer