Yamaha RX-SL80 Manual Do Utilizador

You cannot change parameter values when Memory Guard is set 
to “ON”. If you want to change the parameter values, set Memory 
Guard to “OFF” (see page 45).

■

Function:

This parameter adjusts the level of all the 
DSP effect sounds within a narrow 
range.

Description:

Depending on the acoustics of you 
listening room, you may want to increase 
or decrease the DSP effect level relative 
to the level of the direct sound.

Control range:

–6 to +3 dB

■

Function:

This parameter changes the apparent 
distance from the source sound by 
adjusting the delay between the direct 
sound and the first reflection heard by 
the listener.

Description:

The smaller the value, the closer the 
sound source seems to the listener. The 
larger the value, the farther it seems. For 
a small room, set to a small value. For a 
large room, set to a large value.

Control range:

1 to 99 ms

Function:

These parameter adjusts the volume level 
for each channel in 5-channel stereo 
mode.

Control Range: 0 to 100%

■

■

■

■

Function:

Extends the front stereo image to include 
the surround speakers for wraparound 
effect.

Choices:

OFF/ON, initial setting is OFF.

■

Function:

Gradually adjusts the sound field either 
towards the front or towards the rear.

Control range:

–3 (towards the rear) to +3 (towards the 
front), initial setting is STD (standard).

■

Function:

Adjusts the center image from all three 
front speakers to varying degrees. A 
larger value adjusts the center image 
towards the front left and right speakers.

Control range:

0 (center channel sound is output only 
from center speaker) to 7 (center channel 
sound is output only from front left and 
right speakers), initial setting is 3.