Alen T100 Manual Do Utilizador

8

REPLACING A375UV BULB

Metal Bar across the UV bulb

UV Bulb

L. screw

R. screw

Particle &  

odor sensor

Particle &  

odor sensor

1)   Before replacing the UV bulb, please unplug the unit and remove the cover.

)   Lay down the unit and pull up on the lower end if the front cover and push toward  
 

the display panel at the top and remove.

3)   Remove the HEPA filter by lifting the pull strings on either side of the filter.

4)  Remove the metal bar across the UV bulb by removing the R. & L. screws. 

5)   Hold the edge of the UV bulb and gently twist a quarter turn until it unlocks    
 

from the socket. Pull the pins out of the side of the socket, one at a time.

6)  Remove the UV bulb. Gently handle the new UV bulb on the ends only.

7)   Gently insert the UV bulb into the socket and twist a quarter backward and put  
 

back the metal bar with the screws.

8)  Reinstall the cover by hinging at the top and pressing the bottom of the cover to  
 

snap into place.