Emerson Process Management 3410 Manual Do Utilizador

3-9000-743 Rev S

June 2013

7.2.2

Removal without Extractor Tool

3/8” drive ratchet

3/8” drive extension

3/8” drive 7/16” deep socket

3/8” drive 5/16” hex socket

3/8” drive 1/2” hex socket

3/8” to 1/2” driver adapter

1/2” drive ratchet

1/2” drive 1 1/4” Socket

1 1/4” combination wrench

1 1/8” combination wrench

1” combination wrench

3/16” flat Blade screw driver

1/16” Xcelite Hex driver

6mm Allen wrench

N.A.S. Loctite Nickel Anti-Seize 16 oz. Brush Top P/N 77164

Molykote 111

Shop rags

Adhesive stickers for the cable nuts
Sharpie Fine Point Permanent Marker (Black) Series # 30000, to label transducers:

•

 A1, A2, B1, B2, C1, C2, D1 and D2 for SeniorSonic meters 

•

 A1, A2, B1 and B2 for Juniorsonic meters)

The following instructions are for transducer removal and installation without the use of an 
extractor tool. It is recommended that one work on one transducer assembly at a time to 
reduce the possibility of improper assembly with respect to transducer lengths and location.