Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Heath Zenith
  4. 5212
  5. Manual Do Utilizador

Heath Zenith 5212 Manual Do Utilizador

Download
Página de 12
© 2005 DESA Specialty Products™ 
595-5734-04
Features
•  Turns on lighting when motion is detected.
•  Automatically turns lighting off.
•  Photocell  keeps  the  lighting  off  during  daylight 
hours.
Requirements
•  The Light Control requires a properly installed and 
working light fixture, operating on 120 volts AC.
•  If you want to use Manual Mode, the fixture must be 
wired through a switch.
OPERATION
Instant Motion Sensor 
Light Control
Models 5212 and 5213
Parts
Package includes:
•  Motion Sensor
•  Lamp Adapter (5213)
•  Two mounting screws
Existing Light Fixture
Sensor 
Module
Sensor 
Cord
Typical Installation
The lamp module should only be used with Listed lamp 
fixtures. Never use a light bulb with a higher wattage 
rating than the rating of your fixture.
10  5  1 
TEST
ON-TIME
TEST
* resets to Auto Mode at dawn.
ON-TIME
AUTO
... back on.
1 Second OFF 
then...
MANUAL OVERRIDE
10  5  1 TEST
Mode Switching Summary
Flip switch off for 
one second then 
back on
Move ON-TIME Switch 
to 1, 5 or 10 minutes
MANUAL MODE
AUTO
TEST
*  If you get confused while switching modes, turn the 
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
Lamp Adapter
Floodlamp 
(not included)
Mode: 
On-Time: 
Works:  Day  Night
Test 
5 Sec 
 
x 
x
Auto 
1, 5, 10 min. 
 
 
x
Manual 
Until Dawn* 
 
 
x
Manual  mode  only  works  at  night 
because daylight returns the sensor 
to AUTO.
Flip the light switch off for one second 
then back on to toggle between AUTO 
and MANUAL MODE.
Manual mode works with the ON-TIME 
switch in the 1, 5, or 10 position.
Put the ON-TIME switch in the 1, 5 
or 10 minute position.
Put the ON-TIME switch on the bottom 
of the sensor in the TEST position.