Gemini GEM-P800 Manual Do Utilizador

Easy Arm  (when system is disarmed)

 

The Easy Arm feature allows the system to be armed by 
pressing

followed by

. This will allow the  easy 

arming  of  the system by  someone  who is not a  regular
system user.

Easy Exit  (when system is armed)

This function (if programmed) allows an occupant to leave 
the  premises without disarming the system. Pressing

followed by 

while the system is  armed will 

start a 3 minute period, during which you can leave through 
the Exit/ Entry door.

Bell / Battery Test
   Pressing

followed by 

will cause the bell, or 

siren to sound for 2 seconds. This will also initiate a test of 
your  battery  to make sure it is adequately charged. The 
P800 also  performs an automatic battery test very 24  hours

Access Output
   If programmed, pressing

followed by 

will

activate  the  Access Output which may be configured to 
open a door strike, turn on lighting, or activate some other 
special feature your installer has provided.

Pressing 

followed by

when TROUBLE 

is lit will cause the system to display any current system
troubles.   Pressing

 will exit the  Display System

Trouble Mode.

Chime Mode  On / Off
   Pressing

followed by 

will activate / deactivate 

the door chime.  Activating this feature will cause any door to 
beep the keypad sounder when it is opened.

Program Mode
 Pressing

followed by

will enable the “Program 

Mode”, which will allow you to program and erase user codes. 
(see Programming user codes, page 14)

Keypad Sounder  On / Off
   Pressing

followed by

will deactivate / activate 

the keypad sounder, depending on its present state. By 
deactivating the sounder on a keypad installed in a bedroom, 
for example, you will only turn off 

that keypad’s sounder. 

All other keypads on the system will still sound normally.

11

Oi219c 
page 11

Tuesday, September 16, 1997 08:24