Toshiba camera control unit Manual Do Utilizador

32

When using the unit with an external sync signal to EXT. SYNC terminal on the rear panel. 

When the external sync signal is input, the camera automatically switches its sync from the internal sync to 

the external sync.   

EXT. SYNC input

SYNC

Operation 

External sync with SYNC

䟺

䟺䟺

䟺1䟻

䟻䟻

䟻  External sync signal input conditions

SYNC

䠌

䟺75䂿 unbalanced䟻

0.6 V (p-p) standard

(59.94 Hz Setting) 

(60 Hz Setting) 

Adjust H (Horizontal) phase if necessary to match the output of multiple cameras. 

When adjusting H (Horizontal) phase, refer to the item “7.2 (6) SYNC”. 

Observe the external sync signal and the video signal output 

waveform of the unit with a dual trace oscilloscope, and adjust 

H phase so that the H phases match. 

Match 
the phase.

External
Sync. signal 

Camera 
Sync. output

H : 33.716 

䠽Hz 㼳 35 ppm

V : 59.94 Hz 

㼳 35 ppm

H : 33.75 

䠽Hz 㼳 35 ppm

V : 60 Hz 

㼳 35 ppm

The shutter speed can be set by the horizontal scanning period (1H).

1/1125H to 560/1125H stands for the setting by the 1H and the shutter speed can be set by the 1H. 

䟺

䟺䟺

䟺9䟻

䟻䟻

䟻  Returning to factory settings

The contents set of each scene file can be returned to the factory default status (preset status). 

(1) Select a scene file to set to the factory default status by pressing the [FILE] button. 

(2) If the color bar pattern or characters are displayed on the screen, press the [DISP] button to disable the 

color bar pattern and character display.

(3) Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second. 

(4) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed 

for approx. 1 second.