Allied International Home Security System Manual Do Utilizador
AVT camera cleaning instructions
Hardware Installation Guide V2.0.0
23
under the following number: E9020001) and clean it on both sides using
the techniques explained below.
the techniques explained below.
Not all camera types have the design to remove the filter/protection
glass. See Chapter
glass. See Chapter
Camera type
Tool to be used
Description
Dolphin
AVT order number E9020001
Oscar
1.3 mm hex key (Allen key) AVT
order number K 9020411
order number K 9020411
Loosen both countersunk screws. Remove chro-
matic flange: Take care, C-Mount adjustment
spacers may fall out. Put them back carefully on
chromatic flange and screw chromatic flange
with adjustment spacers in camera.
matic flange: Take care, C-Mount adjustment
spacers may fall out. Put them back carefully on
chromatic flange and screw chromatic flange
with adjustment spacers in camera.
Marlin
AVT order number E9020001
Guppy
Pliers and leather
Carefully unscrew the knurled ring.
Pike
1.3 mm hex key (Allen key) AVT
order number K 9020411
order number K 9020411
Loosen both countersunk screws. Remove chro-
matic flange: Take care, C-Mount adjustment
spacers may fall out. Put them back carefully on
chromatic flange and screw chromatic flange
with adjustment spacers in camera.
matic flange: Take care, C-Mount adjustment
spacers may fall out. Put them back carefully on
chromatic flange and screw chromatic flange
with adjustment spacers in camera.
Stingray
•
Stingray cameras Rev. 1: see
Guppy
Guppy
•
Stingray cameras Rev. 2: AVT
order number E9020001
order number E9020001
•
Stingray cameras Rev. 1:
see Guppy
see Guppy
•
Table 4: How to remove the filter/protection glass
Note
L
•
Taking out the filter requires special care.
•
Ask your dealer to help you if you are not confident
with the procedure.
with the procedure.
Stingray Rev. 1
Stingray Rev. 2