Hitachi DZ-GX5080A Manual Do Utilizador

English

No drive icon appears 
on PC.

The DVD video camera/recorder is not turned on.
Check the power supply.

29

Turn PC off and then disconnect the PC connection cable. Turn 
PC on again, and then use the PC connection cable to connect 
the DVD video camera/recorder to PC.

—

Make sure the PC connection cable is completely plugged into 
this DVD video camera/recorder.

—

Error occurs in playback 
of DVD video camera/
recorder on PC.

If error occurs with USB connection, the transfer rate is not 
sufficient. It is recommended that you use a USB terminal 
conforming to USB2.0 when connecting the DVD video camera/
recorder.

109

Application is not 
normally run on PC.

Turn the PC and DVD video camera/recorder off, and try again.

—

Error occurs during 
writing to disc.

The temperature of DVD video camera/recorder is too high due 
to continuous operation.
Disconnect the DVD video camera/recorder from PC once, 
remove the disc from the DVD video camera/recorder, and then 
turn it off. After a few moments, connect them again and write to 
a brand-new disc.

—

Transfer of images 
stops.

Connect the DVD video camera/recorder to another USB terminal 
of PC. If your PC is a desktop type, it is recommended that you 
use USB terminal on the back of PC. If you are using USB2.0 
extended card, it is also recommended that you install the newest 
version driver provided by each USB2.0 card maker.

—

Is disc scratched or does dirt or fingerprint adhere to it?
Clean the disc.

10

DVD drive built into PC 
cannot be used after the 
provided software has 
been installed.

This problem may be solved if you update the DVD editing/
creating software of your PC.

—

Error appears when 
starting ImageMixer 3.

Make sure that your PC display adapter (video card) conforms to 
DirectX9.0c.

109

Movies are not 
recognized by 
application in PC.

Make sure the power switch of this DVD video camera/recorder is 
set to “

O

” or “

N

”.

29

The DISC EJECT 
button is not valid when 
the DVD video camera/
recorder is connected to 
PC.

While the DVD video camera/recorder is connected to PC, use 
Explorer to right-click the DVD video camera/recorder drive icon 
and execute “Eject”.

115

No sound is heard when 
an MPEG file imported 
into Macintosh is played 
back on Quick Time 
with an MPEG 2 
playback component 
adopted. 

Since an MPEG file imported into Macintosh using ImageMixer 3 
uses the audio format of AC3 audio, no audio will be played back 
even if the Quick Time MPEG-2 playback component is 
introduced: Only video will be played back. Use ImageMixer 3 for 
playback.

122