Hitachi DZ-GX5080A Manual Do Utilizador

English

Disc cannot be 
removed.
(Cover will not open.)

• Did you detach the battery or AC adapter/charger before 

setting the power switch to “OFF”?
Is the battery charged?
Connect a charged battery or the AC adapter/charger, and then 
press the DISC EJECT button to remove the disc.

• Did the DVD video camera/recorder turn off because the 

battery remaining level ran out?
Connect a charged battery or the AC adapter/charger, set the 
power switch to “OFF”, and then press the DISC EJECT button 
to remove the disc.

24, 25, 29

Disc cover cannot be 
closed.

Is disc correctly inserted?
Was disc inserted from wrong direction?
Remove the disc and then reinsert it.

36

Connect a fully charged battery or AC adapter/charger, and then 
turn the DVD video camera/recorder on.

24, 26

Operating sound is 
heard cyclically.

This sound is heard because the disc is cyclically operated and 
does not indicate a fault.

—

Some vibrations are felt 
or slight sound is heard 
from mechanism.

These vibrations or sound are caused by disc drive: This does 
not indicate a fault.

—

• No operation can be 

performed because 
the ACCESS/PC or 
CARD ACCESS 
indicator on this DVD 
video camera/
recorder remains lit or 
blinking.

• After disc or card is 

inserted, it takes 
some time until 
recording is possible.

In the following cases, it will take more time than usual until 
operation is possible:
• Immediately after a disc or card is reinserted.
• When a long time has elapsed since the DVD video camera/

recorder was turned off last.

• When the temperature is greatly different from the status of 

previous recording.

• When disc with scratches, dirt or fingerprints is inserted.
• When disc is subject to severe vibrations.
• When the battery or DC power cord was disconnected instead 

of following the correct procedure using power switch to turn 
the DVD video camera/recorder off.

7, 36

No image in viewfinder.

• Is LCD monitor open?

No image will appear in viewfinder unless the LCD monitor is 
closed and securely locked to DVD video camera/recorder.

• Is the DVD video camera/recorder set to the sleep/restart 

status?
Press the SLEEP/RESTART button to release the sleep/restart 
status.

30, 41

No image appears on 
the LCD screen or in 
the viewfinder.

• Is DVD video camera/recorder connected to PC using PC 

connection cable?
Unplug the PC connection cable.

• Does DVD video camera/recorder stop at the end of the scene 

to which wipe-out was set and played back?
Press the DISC NAVIGATION button.

• Is the DVD video camera/recorder set to the sleep/restart 

status?
Press the SLEEP/RESTART button to release the sleep/restart 
status.

41, 80, 113