Hitachi DZ-GX5080A Manual Do Utilizador

Página de 158
English
36
Inserting and Removing Disc
1
Press down the DISC EJECT button once and 
release it.
A few moments after the ACCESS/PC 
indicator blinks, the cover of disc insertion 
block will open.
2
Gently open the cover by hand fully until it 
stops.
3
When inserting a disc:
Push the disc against the turntable at the 
center to lock it until a click is heard.
When removing the disc:
While pushing down the center portion of 
turntable, pick up the disc, holding its edge, 
to remove it.
• Note that the recording surface of disc must face 
the inside of DVD video camera/recorder. When 
using a single-sided disc, the recording surface is 
the side without label.
• Never touch the disc recording surface or pickup 
lens. Touching the pickup lens could cause a fault.
• Use the disc cleaning cloth provided to wipe off 
any dirt adhering to the disc recording surface.
• Do not use a dirtied or scratched disc.
4
Push the section marked “PUSH CLOSE” on 
the cover of disc insertion block, to close the 
cover.
Then the DVD video camera/recorder will 
automatically recognize the disc: While the 
ACCESS/PC indicator is lit, do not cut off the 
power supply, and do not subject the DVD 
video camera/recorder to any vibrations or 
impact.
Push the shaded 
portion.
Turntable
Pickup lens