Panasonic WJ-MPU955A Manual Do Utilizador

SNTP section

Note: This section should not be changed.

This section allows changes to Simple Network Time Protocol parameters, if SNTP is implemented.

[SNTP]
***{ This section is optional. It is not required unless

}

***{ System defaults are not acceptable. Delete the

}

***{ single asterisks below to make this section active.

}

***{ This section lists user-defined client SNTP values,

}

***{ sync rates and an external server address.

}

***{

}

***{ Format: (VALUES INTERNAL TO THIS UNIT)

}

***{ ClientMode=<mode> (act as an SNTP client)

}

***{ modes: 0 - Internal (default)

}

***{ 1 - Unicast

}

***{ 2 - Anycast

}

***{ 3 - Broadcast

}

***{ ServerMode=<mode> (to expose its timestamp to

}

***{ other units)

}

***{ modes: 0 - Off

}

***{ 1 - On (default)

}

***{ InternalFrequency=<time frequency of sync (secs)> }
***{ -default is 600 sec (10 min)

}

***{

}

***{ (VALUES FOR EXTERNAL CONNECTION)

}

***{ NTPServerIPA=<IPA> of SNTP server

}

***{ -for Unicast mode only; optional for

}

***{ modes 0,2,3.

}

***{ ExternalFrequency=<time frequency of sync (secs)> }
***{ -default is 18000 sec (5 hrs)

}

***{ TZOffset=<hour> time zone offset from GMT

}

***{ (+,-12 in integer values)

}

***{ DaylightSaving=<on/off> (applies for the local

}

***{ time zone)

}

***{ on/off: 0 - off

}

***{ 1 - on

}

*ClientMode=1
*ServerMode=1
*InternalFrequency=600
*NTPServerIPA=192.168.200.XXX
*ExternalFrequency=18000
*TZOffset=5
*DaylightSaving=1

ERRORP section

Note: This section should not be changed.

This section allows changes to Error Log level.

[ERRORP]
ErrorLevel=3