Panasonic WJ-MPU955A Manual Do Utilizador

81

■ System Status Table

The table shows the system status in real time.

1. Select a desired monitor. (Refer to p. 56 Monitor

Selection.)

2. Display "SysStat" menu. (Refer to Step 1 and 2 of p. 77

To Recall Menu Functions.)

3. Select a desired function by pressing one of the F1 to

F3 buttons. 

Available buttons and functions
F1: On
Opens the SYSTEM STATUS table.
F2: Off
Closes the SYSTEM STATUS table.
F3: Blk
Changes the monitor background beween camera
images and black picture.

MON: Monitor number
AREA: Area number
CAM/DVR/SEQ:

C6400001: Unit 64, Camera 1
R6400001: Unit 64, Recorder 1
T640010001P: Unit 64, Area 1, Tour Sequence 1

pause

G640010001P: Unit 64, Area 1, Group Sequence 1

pause

DEV: Device Name

K: System controller number with normal user oper-

ator.

S: System controller number with super user opera-

tor.

ALM: Alarm
EVT: Timer event

USER: User ID

Note: Alarm USRID consists of alarm number and

alarm action number.
E.g. "ALM20" indicates alarm #2 and its action
#0.

PRI: User priority

4. To display the next page, press the + button.

To display the previous page, press the – button.

• To display the first page of table, press the + but-

ton while holding down the SHIFT button.

• To display the last page of table, press the – button

while holding down the SHIFT button.

5. To exit the SYSTEM STATUS table, perform either of the

following.

• Select a camera. (Refer to p. 56 Camera Selection.)
• Press the MON(ESC) button.
• Press the EXIT button.

■ Video Loss History Table

There are 100 video loss detection records stored in
chronological order in 10 pages of table.

1. Select a desired monitor. (Refer to p. 56 Monitor

Selection.)

2. Display "VL Hist" menu. (Refer to Step 1 and 2 of p. 77

To Recall Menu Functions.)

3. Select a desired function by pressing one of the F1 to

F3 buttons. 

Available buttons and functions
F1: On
Opens the VIDEO LOSS HISTORY table.
F2: Off
Closes the VIDEO LOSS HISTORY table.
F3: Blk
Changes the monitor background beween camera
images and black picture.

CAM: Logical camera number that is connected to the

system.

STATE: Indicates video loss changes.

OK: Video loss is recovered.
LS: Video level is below normal and in sync.
VL: Video level is below normal and out of sync.
HL: Video level is above normal and out of sync.

TYPE: Place where the video loss occurs.

S: Video crosspoint input (Not supported)
C: Camera control input

DATE/TIME: Date and time when the video loss state

changes.

SysStat:         010

  On  Off  Blk

VL Hist:         011

  On  Off  Blk