Panasonic WJ-MPU955A Manual Do Utilizador

84

The power cord insulation is
damaged.

Before asking for technical support, please check the following symptoms and their possible causes and solutions. If the solu-
tions below do not solve the problem, or the symptom is not listed below, contact your installer or sales representative.

The power cord, connector, or
power plug are hot-damaged.

The power cord gets warm or
hot if bent or pulled during use.

—

The power cord, connectors, or power plug are damaged. 

If you continue to use it, a fire or an electric shock may
occur.

Unplug the power plug immediately, and refer servicing of
the plug to qualified service personnel.

CPU is not Active.

p. 28

When using Standard System (No Redundant CPU)
Check if the Redundant CPU selector is set to NO.
When using Redundant System
Check if the cable is firmly connected between the SERIAL
ports of both CPUs.

Monitor video display is not sta-
ble.

p. 28

When using Redundant System
Check if both CPUs are Active. In such a case, reboot the
CPUs. If the problem is not solved, contact service person-
nel.

OSD time and date format is
incorrect.

p. 44

Check the time and date format in the SYS.INI file using the
admin console.

OSD time and date shows 1999
1 1.

—

The built-in battery needs to be replaced. Contact service
personnel.

The power is not supplied.

—

Is the power cord connected correctly?
Is the power plug firmly plugged into an outlet?
Insert the power plug firm into an outlet.