Canon REBEL Ti 300V Manual Do Utilizador
6
Quick Start Guide
1
Install the batteries.
Insert two CR2 lithium bat-
teries as shown by the bat-
tery orientation diagram on
the battery compartment
cover. (
teries as shown by the bat-
tery orientation diagram on
the battery compartment
cover. (
→page 14)
2
Attach a lens.
Align the red dots on the
lens and camera and turn
the lens as shown by the
arrow until it snaps into
place. (
lens and camera and turn
the lens as shown by the
arrow until it snaps into
place. (
→page 16)
5
Load the film.
Align the edge of the film
with the <
with the <
> mark, and
close the back cover until it
snaps shut. (
snaps shut. (
→page 18)
• The film will then advance
to the first frame
automatically.
automatically.
6
Focus the subject.
Aim the AF point on the
subject and press the shut-
ter button halfway to auto-
focus. (
subject and press the shut-
ter button halfway to auto-
focus. (
→page 22)
• Under low-light or backlit
conditions, the built-in flash
will pop-up and fire
automatically. (
will pop-up and fire
automatically. (
→page 49)
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 6