Panasonic F0113YS0 Manual Do Utilizador
35
(ENG) VQT4T99
Bearing sensor
16 bearing detection (with angular position correction
function by the 3 axes acceleration sensor, with automatic
declination correction, and with automatic offset adjustment
function)
function by the 3 axes acceleration sensor, with automatic
declination correction, and with automatic offset adjustment
function)
Atmospheric
pressure/altitude
sensor
pressure/altitude
sensor
Atmospheric
pressure
pressure
Measurement range 300 hPa to 1100 hPa, with 24 hour
memory function in 1 hPa unit (every 1.5 hours)
memory function in 1 hPa unit (every 1.5 hours)
Altitude
Convert atmospheric pressure to altitude using ISA
[International Standard Atmosphere],
accuracy: j5 m (–16 feet) to i5 m (16 feet)
[International Standard Atmosphere],
accuracy: j5 m (–16 feet) to i5 m (16 feet)
Depth
Displays in 3 levels
[displays 0 m (0 feet) to 13 m (43 feet) in 3 levels]
[displays 0 m (0 feet) to 13 m (43 feet) in 3 levels]
Waterproof
performance
performance
Equivalent to IEC 60529 “IPX8”.
[Usable for 60 minutes in 13 m (43 feet) water depth]
[Usable for 60 minutes in 13 m (43 feet) water depth]
Crash resistance
perfomance
perfomance
The test method of the camera is in compliance with
“MIL-STD 810F Method 516.5-Shock”
“MIL-STD 810F Method 516.5-Shock”
¢
.
¢
“MIL-STD 810F Method 516.5-Shock” is the test method
standard of the U.S. Defense Department, which specifies
performing drop tests from a height of 122 cm (4 feet), at
26 orientations (8 corners, 12 ridges, 6 faces) using 5 sets of
devices, and passing the 26 orientation drops within
5 devices.
(If failure occurs during the test, a new set is used to pass the
drop orientation test within a total of 5 devices)
standard of the U.S. Defense Department, which specifies
performing drop tests from a height of 122 cm (4 feet), at
26 orientations (8 corners, 12 ridges, 6 faces) using 5 sets of
devices, and passing the 26 orientation drops within
5 devices.
(If failure occurs during the test, a new set is used to pass the
drop orientation test within a total of 5 devices)
•
Panasonic’s test method is based on the above “MIL-STD 810F
Method 516.5-Shock”. However, the drop height was changed
from 122 cm (4 feet) to 200 cm (6.6 feet) dropping onto 3 cm
(0.1 feet) thick plyboard. This drop test was passed.
(Disregarding appearance change such as loss of paint or
distortion of the part where drop impact is applied.)
Method 516.5-Shock”. However, the drop height was changed
from 122 cm (4 feet) to 200 cm (6.6 feet) dropping onto 3 cm
(0.1 feet) thick plyboard. This drop test was passed.
(Disregarding appearance change such as loss of paint or
distortion of the part where drop impact is applied.)
There is no guarantee of not breaking or malfunctioning
under all conditions.
under all conditions.
Withstand Load
Performance
Performance
100 kgf/220.5 lbf (According to the test conditions specified
by Panasonic)
by Panasonic)
Dustproof
performance
performance
Equivalent to IEC 60529 “IP6X”.
DMC-FT5&TS5P-VQT4T99_eng.book 35 ページ ２０１３年１月７日 月曜日 午後２時５３分