Nikon D800 (Body Only) Guia Do Utilizador
414
n
AF-assist illuminator does not light
:
• AF-assist lamp does not light if AF-C is selected for autofocus mode
(0 91). Choose AF-S. If an option other than auto-area AF is selected for
AF-area mode, select center focus point (0 96).
AF-area mode, select center focus point (0 96).
• The camera is currently in live view or a movie is being recorded.
• Off selected for Custom Setting a8 (Built-in AF-assist illuminator)
• Off selected for Custom Setting a8 (Built-in AF-assist illuminator)
• Illuminator has turned off automatically. Illuminator may become hot
with continued use; wait for lamp to cool down.
Flicker or banding appear during live view or movie recording
: Choose an option for
Flicker reduction that matches the frequency of the local AC power
supply (0 329).
Bright bands appear during live view or movie recording
supply (0 329).
Bright bands appear during live view or movie recording
: A flash or other light
source with brief duration was used during live view or movie recording.
Noise (bright spots, randomly-spaced bright pixels, fog, lines, or reddish areas) appears in
photos
Noise (bright spots, randomly-spaced bright pixels, fog, lines, or reddish areas) appears in
photos
:
• To reduce randomly-spaced bright pixels, fog, or lines, choose lower ISO
sensitivity or use high ISO noise reduction (0 109, 277).
• To reduce bright spots, randomly-spaced bright pixels, or fog at shutter
speeds slower than 1 s or to reduce reddish areas and other artifacts in
long time-exposures, enable long exposure noise reduction (0 277).
long time-exposures, enable long exposure noise reduction (0 277).
• Turn Active D-Lighting off to avoid heightening the effects of noise
Photos are blotched or smeared
:
:
• Adjust white balance to match light source (0 145).
• Adjust Set Picture Control settings (0 163).
Can not measure white balance
• Adjust Set Picture Control settings (0 163).
Can not measure white balance
: Subject is too dark or too bright (0 157).