Samsung EK-GC100ZWAATT Manual Do Utilizador
(
)
(
)
1. Remove the plastic cover, then plug the flat end of the
Travel Charger into the Power/Accessory Interface
connector and the other end into a standard AC wall
outlet.
2. When charging is finished, remove the flat end from
the interface connector jack on the camera.
Important! If your handset has a touch screen display, please
note that a touch screen responds best to a light
touch from the pad of your finger. Using excessive
force or a metallic object when pressing on the
touch screen may damage the tempered glass
surface and void the warranty. For more
information, refer to “Standard Limited Warranty”
on page 155.
touch from the pad of your finger. Using excessive
force or a metallic object when pressing on the
touch screen may damage the tempered glass
surface and void the warranty. For more
information, refer to “Standard Limited Warranty”
on page 155.
Note: Failure to unplug the wall charger before you remove the
battery, can cause damage to the camera.
Low Battery Indicator
When the battery is weak, the battery icon
blinks and
the device sounds a warning tone at regular intervals. In this
condition, your camera conserves its remaining battery
power, not by turning off the backlight, but by entering the
dimming mode. For a quick check of your battery level,
glance at the battery charge indicator located in the upper-
right corner of your device’s display. Solid color
condition, your camera conserves its remaining battery
power, not by turning off the backlight, but by entering the
dimming mode. For a quick check of your battery level,
glance at the battery charge indicator located in the upper-
right corner of your device’s display. Solid color
indicates a full charge.
9