Canon EOS50DBODY Manual Do Utilizador

89

Single and continuous drive modes are provided. In the Basic Zone 
modes, the optimum drive mode is set automatically.

Press the <o> button. 

(9)

 

While looking at the LCD panel, turn 
the <5> dial.

u

: Single shooting

When you press the shutter button completely, one shot will be 

taken.

o

: High-speed continuous shooting

 (Max. 6.3 shots per sec.)

i

: Low-speed continuous shooting

 (Max. 3 shots per sec.)

In the o and i modes, the camera will shoot continuously 

while you hold down the shutter button completely.

j

: Self-timer

 (10-sec. delay)

l

: Self-timer

 (2-sec. delay)

See the next page for the self-timer operation procedure.

i

 Selecting the Drive ModeN

 

When the internal buffer memory becomes 
full during continuous shooting, “buSY” will 
be displayed on the LCD panel and in the 
viewfinder and shooting will be disabled 
temporarily. As the captured images are recorded to the card, you will be 
able to shoot more images. Press the shutter button halfway to check in 
the viewfinder’s bottom right for the current maximum burst. This is the 
maximum number of shots that can be taken continuously.

 

If “FuLL CF” is displayed in the viewfinder and on the LCD panel, wait 
until the access lamp stops blinking, then replace the card.

 

When the battery level is low, the continuous shooting speed will be 
slightly slower.

 

In the AI Servo AF mode, the continuous shooting speed may become 
slightly slower depending on the subject and the lens used.

Maximum burst

COP

Y