JVC LYT0329-001B Manual Do Utilizador

 EN

6

4

6

4

6

Set depending on your preference.

Set the Power Switch to “

”, “5S” or “

” while

pressing down the Lock Button located on the switch,
and open the LCD monitor fully or pull out the
viewfinder fully.

•The power lamp comes on and the camcorder is

turned on.

Press MENU. The Recording Menu appears.

First move the highlight bar to “REC MODE” by
rotating the Select Dial. Press the Select Dial and the
parameter “SP” or “LP” is highlighted. Select “SP” or
“LP” by rotating the Select Dial. Press the Select Dial
twice to exit from the Recording Menu.

•Insert Editing or Audio Dubbing is impossible on a

tape recorded in the LP mode.

•“LP” (Long Play) is more economical, providing

1.5 times the recording time.

●

If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.

●

It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.

●

During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.