JVC LYT0329-001B Manual Do Utilizador

EN

First press PUSH-OPEN and open the LCD monitor
fully.
Slide OPEN/EJECT in the direction of the arrow, then
swing the cassette cover open until it locks. The
holder opens automatically.
Insert a tape and press “PUSH HERE” to close the
cassette holder.

Set the Power Switch to “

” while pressing down

the Lock Button located on the switch. The power
lamp lights.

Press PLAY/PAUSE (6/4). The playback picture
appears.

Press STOP (5).

Press REW (2) to rewind, or FF (3) to fast-forward the
tape during Stop mode.

● If Stop mode continues for 5 minutes when the power

supply is a battery pack, the camcorder shuts off automati-
cally. To turn on again, set the Power Switch to “OFF”, then
to “

”.

● The playback picture can also be viewed in the viewfinder

(with the viewfinder pulled out) or on a connected TV
(

Z

 pg. 48, 49). Camcorder operation is the same as

described in this section.

● You can also view the playback picture on the LCD monitor

with it flipped over and retracted.

● LCD monitor/viewfinder indications:

•

When power is supplied from the battery pack: the
“

” battery pack remaining power indicator is

displayed on the LCD monitor when it is turned on.
When power is supplied through the DC cord: “

”

does not appear.

•

During Stop mode, none of the indications are displayed
in the viewfinder.

● Copy guarded tapes cannot be played back. The screen

becomes blue back.

You can adjust the speaker (or headphones connected to
the headphones connector) volume by pushing the Power
Zoom Lever.

.... push the Power Zoom Lever (VOL.) towards “+”.

.... push the Power Zoom Lever (VOL.) towards “–”.

REW (2) Button

FF (3) Button

PLAY/PAUSE (6/4) Button

STOP (5) Button