JVC LYT0329-001B Manual Do Utilizador

PLAYBACK

Advanced Connections

Connection To A Personal Computer

This camcorder can transfer still images to a personal
computer by using the provided software when connected
as shown in the illustration. It is also possible to transfer
still images to a personal computer with a DV connector-
equipped capture board installed.

CONFIRM POWER-OFF STATUS

Make sure the camcorder and PC are turned off.

CONNECT CAMCORDER TO PC

Press PUSH-OPEN and open the LCD monitor fully.
Connect the camcorder to a PC using the cable
according to your PC type as shown in the
illustration.

TURN ON POWER

Turn the camcorder’s Power Switch to “

” while

pressing down the Lock Button located on the switch
and turn on the PC.

NOTES:

●

It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(

pg. 7).

●

Never connect the JLIP-PC connection cable and the
DV cable simultaneously to the camcorder. Connect
only the cable you wish to use to the camcorder.

●

The date/time information cannot be captured into PC.

●

Also refer to the instruction manuals of the provided
Software and the DV connector-equipped capture
board.

●

Be sure to use a DV cable with the core filter. The core
filter reduces interference.

●

Be sure to wind the DV cable twice around the core
filter attached to the end connected to the camcorder.

To JLIP (DIGITAL
STILL) output

To
RS-232C

DV cable
(provided with
GR-DVL9600,
optional for
GR-DVL9500)

To DV
connector

PC with DV connector-
equipped capture board

To DV
OUT

Core
filter

PUSH-OPEN Button

JLIP-PC
connection
cable
(provided)

Core filter