JVC LYT0329-001B Manual Do Utilizador

 EN

The audio track can be customized only when recorded
on the 32 kHz mode (

Z

 pg. 30).

● Audio Dubbing is not possible on a tape recorded at

48 kHz, on a tape recorded in the LP mode or on a blank
portion of a tape.

● To perform Audio Dubbing while watching in the television,

make connections (

Z

 pg. 48).

Play back the tape to locate the point where editing
will start, then press PAUSE (6).

While holding A.DUB (e) on the remote control,
press PAUSE (6). “6e” appears.

Press PLAY (4) , then begin “narrating”.

•Speak into the microphone.

Press PAUSE (6).

Press STOP (5).

●

While an optional microphone is connected, the built-in
microphone is disabled.

●

When editing onto a tape that was recorded at 32 kHz,
the old and new soundtracks are recorded separately.

●

To select the desired sound for playback, press AUDIO

MONITOR on the remote control.

●

If you dub onto a blank space on the tape, the sound may

be disrupted. Make sure you only edit recorded areas.

●

If feedback or howling occurs during TV Playback, move
the camcorder’s microphone away from the TV, or turn

down the TV’s volume.

●

Sound is not heard from the speaker during Audio

Dubbing. To hear sound, connect optional headphones
to the AV OUT (headphones) connector.
Be sure to use the core filter (provided) when using

headphones.

●

If you change from 32 kHz to 48 kHz in mid-recording

and then use the tape for Audio Dubbing, it is not
effective from the point where 48 kHz recording began.

●

During Audio Dubbing, when the tape moves to scenes

recorded in the LP mode, scenes recorded at 48 kHz or
a blank portion, Audio Dubbing stops and “ERROR!

REFER MANUAL” appears.

32 kHz

FULL SOUND

Original and new tracks are combined and output in stereo.

SOUND 2

New track is output on both “L” and “R” channels in stereo.

SOUND 1

Original track is output on both “L” and “R” channels in stereo.