Lowrance electronic LVR-880 US Manual Do Utilizador

Lowrance - LVR-880 Operation Instructions

10

Error 

2 short beeps 

•

Acknowledge 

1 long beep

•

Alarm 

Two-tone ring 

•

 

(repeated for 2 minutes or until any key is pressed)

LL position call alert 

Friendly 5-tone ring sequence 

•

 

(press any key to cancel)

WX alert / SAME alert  Ear-catching multi-tone sequence

•

ROUTINE call alert 

Friendly 5-tone ring sequence 

•

 

(press any key to cancel)

URGENCY call alert 

Two-tone ring 

•

 

(repeated for 2 minutes or until any key is pressed)

SAFETY call alert 

Two-tone ring 

•

 

(repeated for 2 minutes or until any key is pressed)

DISTRESS call alert 

Two-tone ring 

•

 

(repeated for 2 minutes or until any key is pressed)

You can customize many settings on the LVR-880 to suit your own preferences and enter and 
store alphanumeric data (such as a buddy name), but you cannot do this while the radio is 
operational, you must put the radio into MENU mode first.

Hold dow

1. 

n CALL MENU for about 3 seconds to put the radio in MENU mode. 

Note: Only three menu items can be displayed at any one time on the LCD. 
Press EXIT 

2. 

or PTT any time to quit MENU mode and return to operational mode.

Hold down CALL MENU for about 3 seconds to put the radio in MENU mode.

To navigate through a menu:

Press + or – 

1. 

on the microphone OR turn the Channel Select knob on the base station to 

scroll up or down through the menu until the cursor is positioned at the desired option. 
Press ENT (th

2. 

e center of the Channel Select knob) to display that option.

Hold down 

1. 

CALL MENU for about 3 seconds to put the radio in MENU mode.

For example, select BUDDY LIST then press ENT. Press ENT again for a new Buddy and 

2. 

enter the alphanumeric name.
Press + or – on the microphone OR turn the Channel Select knob to step through 

3. 

alphanumeric characters one at a time.
Press ENT (the center of the Channel Select knob) to confirm your choice or setting. 

4. 

If you make an error, press – until < is displayed, then push the center of the Channel 

5. 

Select knob to backup.