Lowrance electronic LVR-880 US Manual Do Utilizador

Lowrance - LVR-880 Operation Instructions

16

If you try and add another favorite channel, a warning message asks if you want to overwrite 
CH3. Press ENT to confirm.

To delete a favorite channel, select that channel then hold down 3CH. A message asks if you 
want to delete that favorite channel. Select YES then press ENT to delete it. 

Channel Select and scroll through menus. (Located on the microphone.) 

When in MENU mode:

press + or - to scroll the cursor through the MENU options.

•

When in operational mode:

press + to step UP a channel OR – to step DOWN a channel.

•

hold down + or – to step quickly through the channels.

•

There are two SCAN modes you can use to find the broadcast channel:

ALL SCAN mode scans ALL channels in sequence AND checks the priority channel every 

•

2 seconds.
3CH SCAN mode scans the favorite channels and CH16.

•

When a signal is received, scanning stops at that channel and BUSY appears on the LCD. If 
the signal ceases for more than 5 seconds, the scan restarts. Press SCAN or PTT to stop at the 
current channel.

If you are in NAVIGATION mode or FM RADIO mode and want to scan the DSC channels while 
staying in that mode, just hold down SCAN.

Note: SCAN functionality is limited in some European countries and, if ATIS mode is enabled, 
the 3CH SCAN mode will be disabled and an error beep will sound.

Note: The weather channel is also scanned if TONE ALERT or SAME is ON (LVR-880US only).
ALL SCAN mode

Hold down SCAN for about 3 seconds to start an ALL SCAN. ALL SCAN appears on the LCD. 

Press ENT to temporarily skip over (lock out) an “always busy” channel when in ALL SCAN 
mode. An X is shown on the top line of the LCD to designate a skipped channel. The X 
will disappear when the radio is powered OFF/ON. With scanning OFF and the X channel 
selected, press ENT to cancel the skipped channel.

Note: It is not possible to skip over the priority channel. 

Press SCAN to stop at the current channel.