Lowrance electronic LVR-880 US Manual Do Utilizador

Lowrance - LVR-880 Operation Instructions

22

Tip: If you are in the NAV big number screen, just turn the Channel Select knob to immedi-
ately access the Waypoint List. Select the new waypoint and press ENT.

MENU SELECT

WAYPOINT

 BACKLIGHT

 BUDDY LIST

WAYPOINT

WP LIST

 NEAREST WP

 TEMP

NEAREST WP

R01W04 001

         98
 R01W01 003
        136

Note: A valid GPS signal must be received to see this selection.

Select WAYPOINT then NEAREST WP.

1. 

Press ENT to display the nearest waypoint with distance and bearing from your current 

2. 

position. 
Other waypoints are listed in increasing distance from your current position. 
Press ENT to set the nearest waypoint as the active waypoint OR move the cursor to 

3. 

another waypoint and then press ENT.
The chosen waypoint is shown on the bottom line of the LCD.

MENU SELECT

WAYPOINT

 BACKLIGHT

 BUDDY LIST

WAYPOINT

 WP LIST

 NEAREST WP

TEMP

TEMP

TEMP1

 TEMP2

TEMP1

GO

 TEMP EDIT

 DELETE

Select WAYPOINT then TEMP.

1. 

Your temporary waypoint list is displayed. There are 3 choices for quick access. 

2. 

Select the temporary waypoint to go to. Press ENT. 

3. 

Press ENT to set the temporary waypoint as the destination waypoint. It is immediately 

4. 

shown on the bottom line of the LCD.

Tip: Hold down MOB and release before the 3 second countdown completes. Your current LL 
position is stored in TEMP1 to TEMP3 in the waypoint list. If the list is full, a message appears 
asking if the oldest location can be overwritten:

TEMP WP FULL

DELETE TEMP1?

YES

 NO