Lowrance electronic LVR-880 US Manual Do Utilizador

Lowrance - LVR-880 Operation Instructions

48

Press ENT then set the working channel.

4. 

Note: Duplex channels cannot usually be called and are automatically eliminated from the 
suggested call list. If the call is to a Coast Station, the channel is selected automatically. 

The call details are shown. Press ENT to SEND the call. 

5. 

The Tx symbol is shown on the LCD while the call is being sent. 
If the call is acknowledged (INDIV ACK) press PTT to talk. If there is no reply (UNABLE TO 

6. 

ACKNOWLEDGE) after 30 seconds a message asks if you want to retry (SEND AGAIN?). 
Press ENT to retry the call. 

The radio sounds a friendly two-tone alert when it detects an incoming DSC call. 

Incoming individual calls are almost always ROUTINE priority.  

You must manually acknowledge an incoming call. 

RCV:INDIV

012345678

ENTER -  ACK

EXIT

If the radio recognizes the MMSI as one of your buddies, your buddy’s name is displayed in 
place of the MMSI. 

Press ENT to automatically acknowledge the incoming call and stop the call alert. 

1. 

The radio automatically selects the channel designated by the incoming call.
The caller should respond to your acknowledgement by making voice contact on the 

2. 

designated channel. If not, you can press PTT to initiate voice contact instead. 

This facility is useful and used frequently.

DSC CALL

 INDIVIDUAL

LAST CALL

 GROUP

SEAROSE

INDIVIDUAL

ROUTINE

10:22AM LOC

SEAROSE

INDIVIDUAL

ROUTINE

SET CHANNEL

SEAROSE

INDIVIDUAL

ROUTINE

SEND?

 

Select DSC CALL then LAST CALL. 

1. 

The contact details of the most recent incoming call are displayed. Press ENT.

2. 

Select the working channel and press ENT. 

3.