Crestron electronic MMK-6X-DSW Manual Do Utilizador

Crestron MMK/WMKM-6X-DSW 

Mud Mount Kits for the TPS-6X-DSW 

Mud Mount Kits are the preferred mounting option for the TPS-6X-DSW when the 
cutout made in the drywall for docking station installation is too large. These kits 
provide support for additional plastering that can be applied to hide large 
irregularities in the cutout. 

NOTE:  If mounting into a material other than drywall (for example, wood lectern, 
concrete or rock) use the cutout template, available in the post-construction kit 
WMKM-6X-DSW. For concrete and rock mounting material, allow for proper 
ventilation before mounting the TPS-6X-DSW. 

There are two Mud Mount Kits. The MMK-6X-DSW is a pre-construction 
accessory. Pre-construction refers to framed walls prior to hanging drywall. This 
accessory must be used with either the Pre-Construction Mount Kit (PMK-6X-DSW) 
or Back Box (BB-6X-DSW). 

The WMKM-6X-DSW is a post-construction kit. Post-construction refers to framed 
walls with drywall hung. This accessory is designed with a mounting plate so that it 
can be placed anywhere on a wall without the support of a stud. 

NOTE:  Since the TPS-6X-DSW contains moving parts, mounting to a stud offers 
more support and is therefore highly recommended.  Although Crestron

®

 offers the 

post-construction WMKM-6X-DSW mounting option, a mounting option that is 
secured to a stud, such as the BB-6X-DSW or PMK-6X-DSW is highly 
recommended. 

NOTE:  If necessary, consult the latest revision of the TPS-6X-DSW Operations and 
Installation Guide (Doc. 6708) for a complete list of mounting options. The 
document is available from the Crestron website (

•  1