Philips DVP620VR Manual Do Utilizador
The region code for this set is 4.
Since it is usual for DVD movies to be released
at different times in different regions of the
world, all players have region codes and discs
can have an optional region code. If you load a
disc of a different region code to your player,
you will see the region code notice on the screen. The disc
will not playback, and should be unloaded.
at different times in different regions of the
world, all players have region codes and discs
can have an optional region code. If you load a
disc of a different region code to your player,
you will see the region code notice on the screen. The disc
will not playback, and should be unloaded.
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
and the double-D symbol are trademarks of Dolby Laboratories.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorised by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorised by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorised by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorised by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
2
General Information
Thank you for purchasing this Philips DVD/ VCR.This Owner’s
Manual explains the basic operation of this DVD/ VCR.
Manual explains the basic operation of this DVD/ VCR.
Environmental Information
All unnecessary packaging has been omitted.
Packaging has been made easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet).
Your DVD/VCR consists of materials which can be recycled
and reused if disassembled by a specialised company. Please
observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
Packaging has been made easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet).
Your DVD/VCR consists of materials which can be recycled
and reused if disassembled by a specialised company. Please
observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
Supplied Accessories
• Remote control • Batteries (two AA size) for Remote control
• AV cable • RF Coaxial cable • Owner’s Manual
• AV cable • RF Coaxial cable • Owner’s Manual
Safety Information
• To reduce the risk of fire or electric shock, do not expose
this device to rain or moisture.
• Before operating the DVD/VCR, check that the operating
voltage indicated on the typeplate (or the voltage indication
beside the voltage selector) is identical with the voltage of
your local power supply. If not, please consult your dealer.
beside the voltage selector) is identical with the voltage of
your local power supply. If not, please consult your dealer.
• Place the DVD/VCR on a flat, hard and stable surface.
• There must be sufficient room in front of the player for the
• There must be sufficient room in front of the player for the
disc tray to be opened.
• In cabinet, allow about 2.5cm (1inch) of free space all around
the player for adequate ventilation.
• Do not expose your player to extreme of temperature or
humidity.
• If the DVD/VCR is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture may
condense on the lens of the disc unit inside the DVD/VCR
player. Should this occur, the DVD/VCR would not operate
normally. Leave the player on for about one hour with no disc
in the DVD/VCR until normal playback is possible.
condense on the lens of the disc unit inside the DVD/VCR
player. Should this occur, the DVD/VCR would not operate
normally. Leave the player on for about one hour with no disc
in the DVD/VCR until normal playback is possible.
• The mechanical parts of the set contain self-lubricating
bearings and must not be oiled or lubricated.
• Never spill liquid of any kind on this unit. If liquid is spilled
into the unit, consult qualified service engineer.
• When the DVD/VCR is switched to Standby mode, it
is still consuming some power. To disconnect the
system from the power supply completely, remove
the AC power plug from the wall socket.
system from the power supply completely, remove
the AC power plug from the wall socket.
Notice for the progressive scan outputs
Consumers should note that not all high definition television
sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of 625
progressive scan picture problems, it is recommended that the
user switch the connection to the ‘standard definition’ output.
If there are questions regarding our TV set compatibility with
this model 625p (576p) DVD player, please contact our
customer service centre.
sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of 625
progressive scan picture problems, it is recommended that the
user switch the connection to the ‘standard definition’ output.
If there are questions regarding our TV set compatibility with
this model 625p (576p) DVD player, please contact our
customer service centre.
Introduction
Laser safety
This unit employs a laser. Due to possible eye injury, only a
qualified service person should remove the cover or attempt
to service this device.
qualified service person should remove the cover or attempt
to service this device.
USE OF CONTROLS OR ADJUSTMENTS OR
OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
4
For Customer Use:
So that you can identify your machine for service questions
or in the event of theft, enter the serial number here.The
serial number (PROD. NO.) is printed on the type plate
fixed at the back of the device.
Model No. DVP620VR
Serial No. ________________________________________
So that you can identify your machine for service questions
or in the event of theft, enter the serial number here.The
serial number (PROD. NO.) is printed on the type plate
fixed at the back of the device.
Model No. DVP620VR
Serial No. ________________________________________
LASER
Type
Type
Semiconductor laser GaAlAs
Wave length
655 nm (DVD)
790 nm (VCD/CD)
790 nm (VCD/CD)
Output Power
0.8 mW (DVD)
0.5 mW (VCD/CD)
0.5 mW (VCD/CD)
(WARNING
LOCATION:
ON THE
BACKPLATE OF
SET)
ON THE
BACKPLATE OF
SET)
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
KLASSE 1 LASER PRODUKT
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
About the PBC Function of Video CD
• This unit conforms to ver.1.1 and ver.2.0 of VIDEO CD
standard, with PBC function.
Ver.1.1 (without PBC function):You can enjoy playback picture
as well as music CD.
Ver.2.0 (with PBC function):When using a VIDEO CD with
PBC function, “PBC” appears on
the display.
the display.
• “PBC” stands for Play Back Control.
• Video CD with PBC function has its original menu. Menu
• Video CD with PBC function has its original menu. Menu
operation may vary depending on the disc. Refer to the
manual included in the disc for details.
• “pbc” appears on the front panel display when a Video CD
with PBC function is loaded.
Note:
This Player can be used only where the power supply is AC
230V-240V, 50Hz. It cannot be used elsewhere.
230V-240V, 50Hz. It cannot be used elsewhere.
FOR YOUR SAFETY (in Australia):
Install any external aerial to AS 1417.1
Install any external aerial to AS 1417.1
H9723AD(EN).qx3 04.6.25 3:28 PM Page 2