Sony KLV-26S200A Manual Do Utilizador

 GB

KLV-46S200A

2-891-357-11(1)

Sets the timer to turn on/off the TV.

Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby 
mode. 
When the “Sleep Timer” is activated, the 

 (Timer) indicator on the TV (front) 

lights up in amber.

• If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
• “TV will soon turn off by Sleep Timer” appears on the screen one minute before the TV 

switches to standby mode.

On Timer
Sets the timer to turn on the TV.
“Day”: Selects the day on which you want to activate the On Timer.
“Time”: Sets the time to turn on the TV.
“Duration”: Selects the time period after which the TV automatically switches to 
standby mode again.
“Volume Setup”: Sets the volume when the timer turns on the TV.

Clock Set
Allows you to adjust the clock manually.

Power Saving
Selects the power saving mode to reduce the power consumption of the TV.
When “Picture Off” is selected, the picture is switched off and the 

 (Picture Off) 

indicator on the TV (front) lights up in green. The sound remains unchanged.

Power Consumption
Displays the power consumption level of the selected power saving mode.
When “Display” is selected, power consumption level will be displayed on the 
screen when you press 

 

 

or turn on the TV.

Automatically optimizes the picture settings according to the ambient light in the 
room.

Sets the volume control at a low level when the TV is first turned on, gradually 
increasing the sound to a preset level.

Switches on/off the TV’s internal speakers.
“On”: The TV speakers are turned on in order to listen to the TV’s sound through 
TV’s speakers.
“Off”: The TV speakers are turned off in order to listen to the TV’s sound only 
through your external audio equipment connected to the audio output jacks.

Sets the method used to adjust the volume from the connected audio system. This 
option can be selected only when “Speaker” is set to “Off”.
“Variable”: The audio output level from the connected audio system can be 
controlled by the TV’s remote.
“Fixed”: The audio volume is fixed on the TV. Adjust the volume (and the audio 
settings) on the audio system.

Selects the color system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”, or 
“PAL60”) according to the input signal from the input source.

Displays the serial number and model name of your TV.

Resets all the Setup settings to the factory settings and then launches the Auto 
Startup screen.

010COV.book  Page 24  Friday, September 8, 2006  9:24 AM