Sony KLV-26S200A Manual Do Utilizador

 GB

KLV-46S200A

2-891-357-11(1)

 

No sound, but good picture

• Press 2 +/– or % (Mute).
• Check that “Speaker” is set to “On” in the “Setup” menu (page 24).

Noisy sound

• See the “Picture (dotted lines or stripes) noise” cause/remedy on page 33.

“High” is selected in “Audio 
Filter” when you use “Mono”.

• Set to “Low”.

Stereo broadcast sound 
switches on and off, or is 
distorted;
The sound switches between 
stereo and monaural frequently

• The antenna connection is loose or the antenna cable is damaged. Check the 

cable and connection on the TV, VCR, and on the wall (page 4).

• Adjust the antenna direction for the minimum interference. Contact a Sony 

dealer for advice.

• Signal transmission is low. Try using a booster. Otherwise, use the fine 

tuning (“AFT”) function (page 27). 

No sound from the computer

• Check the connection of the audio cable (page 28).

The TV turns off automatically 
(the TV enters standby mode)

• Check if the Sleep function is activated (page 24).
• “Power Management” is set to “On” when a PC is connected.

Some input sources cannot be 
selected

• Select “Video Labels” in the “Setup” menu and cancel “Skip” of the input 

source (page 23).

The remote does not function

• Replace the batteries.

The wide screen mode 
changes spontaneously when 
“Auto Wide” is “On”

• During a transition between two programs, the TV detects the optimum 

wide screen mode. During this period, an irregular wide screen mode may 
appear.

• The wide mode is switched automatically according to the revised signal 

with a Wide ID signal.

• The Auto Wide feature stops working temporarily when you press 

, and 

resumes after a while. To fix in the manually selected wide screen mode, set 
“Auto Wide” to “Off” in the “Screen” menu (page 22).

Text display is incomplete or 
garbled

• Your area may not be able to receive Text. Text is displayed only in the area 

that is covered by Text services.

• The antenna connection is loose or the antenna cable is damaged. Check the 

cable and connection on the TV, VCR, and on the wall (page 4).

• Adjust the antenna direction. Contact a Sony dealer for advice.
• Signal transmission is too low. Try using a booster. 
• Using the fine tuning (“AFT”) function may improve the picture (page 27). 

Cannot play shooting games

• Some shooting games which involve pointing a light beam at the TV screen 

with an electronic gun or rifle cannot be used with your TV. For details, see 
the instruction manual supplied with the video game software.

The TV cabinet creaks

• Changes in room temperature sometimes make the TV cabinet expand or 

contract, causing a noise. This does not indicate a malfunction.

Static discharge is felt when 
touching the TV cabinet

• This is the same static discharge that is felt when touching metal door 

handles or car doors especially when the air is dry, for example in winter. 
This does not indicate a malfunction.

010COV.book  Page 34  Friday, September 8, 2006  9:24 AM