Accusplit 970-069 Folheto

SETTING UP YOUR PEDOMETER 
To record your distance and calories accurately, you will need 

to set your stride length and body weight. 

CHOOSING A MEASUREMENT SYSTEM 
This unit is initially set to use English measurement units  

(Miles and Pounds).  To change the unit back and forth 

between English and Metric units (Kilometers and Kilograms), 

press the green RESET button for 5 seconds. 

Finding Your Stride Length: Your stride length is the length of 

one of your steps, measured from “toe to toe.” To measure, 

walk 10 steps with your normal stride and measure the TOTAL 

DISTANCE from the toe of your starting step to the toe of your 

10

th

 step (see diagram below). Divide the TOTAL DISTANCE by 

10. This is your stride length. Example: If you walk 22 feet, your 

stride length is 2.2 feet. 

Setting Your Stride Length: Press the yellow MODE button 

until arrow on bottom of display points to “DIST.” Press the 

dark blue SET button once to enter setting mode. Display will 

shift to show stride (for example, “F 1.95” means stride is set 

to 1.95 feet). Press the dark blue SET button(+) to increase 

stride length. Press the green RESET button(–) to reduce stride 

length. Press the yellow MODE button to exit setting mode.  

Setting Your Weight: Press the yellow MODE button until arrow 

on bottom of display points to “CAL.” Press the dark blue SET 

button once to enter setting mode. Display will shift to show 

weight in pounds. For example, “L 165” means weight is set to 

165 lbs. Press the dark blue SET button(+) to increase weight 

setting. Press the green RESET button(–) to reduce weight 

setting. Press the yellow MODE button to exit setting mode.

Setting the Clock: Press the yellow MODE button until the  

arrow on the bottom of the display points to the clock icon  .   

Press the dark blue SET button to enter clock setting mode 

(clock readout will flash).  Press the green RESET button to 

advance Hours.  Press the dark blue SET button to advance 

Minutes.  Press the aqua CLOCK   button to shift between 

12 and 24 hour mode.  (“H” will show in display for 24 hour 

mode.) Press the yellow MODE button to exit clock setting 

mode, or wait a few seconds for pedometer to automatically 

exit clock setting mode.

WEARING YOUR PEDOMETER
While gently holding the belt clip open, slide the pedometer 

onto your belt or the top edge of your pants or skirt. It should 

fit snugly and level, above one knee. 

Note: The pedometer should be as vertical as possible. 

Walkers with larger stomachs may find it helpful to wear the 

pedometer farther back on the body, toward one hip. 

The cover must be closed for the pedometer to work. To avoid 

losing or dropping your pedometer, use the included leash 

and clip to fasten the pedometer securely to your clothing. 

ACCUSPLIT, Inc.  •  6120 Stoneridge Mall Rd., Suite 210  •  Pleasanton, CA 94588 USA

800-965-2008  •  925-226-0888  •  FAX 925-463-0147  •  www.ACCUSPLIT.com  •  support@ACCUSPLIT.com

Congratulations on taking the first step to wellness 

with your purchase of an ACCUSPLIT pedometer.  

It’s easy to set up your new pedometer.  

Just follow the steps below, and start walking!

ACCUSPLIT®
       EAGLE

™

 

970-069

ACCUSPLIT

 

EAGLE

627 I

™

Dark Blue:

SET

Green:

RESET

Yellow:

MODE

Cream: 

SCAN

(toggle on/off)

Aqua:

CLOCK

(momentary)

Current mode 

arrow indicator

DISPLAY MODES
Press the yellow MODE button to cycle through: 
•  STEP: STEP mode shows your step count since last  

  reset, up to 200,000 steps. 
•  DIST: DISTANCE mode shows distance walked or  

  jogged since last reset, in miles or kilometers.
•  CAL: CALORIE mode shows calories burned  

  through step activity since last reset.
• 

: ACTIVITY TIMER MODE shows total activity  

  time in minutes and seconds then hours and  

  minutes since last reset. The timer runs automati- 

  cally whenever steps are being recorded.
• 

: CLOCK mode shows time of day.

•  SCAN mode: Loops through each display mode,  

  briefly showing step count, then distance, then  

  calories.