ONKYO DV-SP506 Manual Do Utilizador

 

51

 

With this setting you can select the video format to be 
used for the SCART AV CONNECTOR: RGB, S-Video, 
or composite video. Before changing this setting, refer to 
your TV’s manual to see if its SCART input can accept 
video signals in these formats.

 

Composite video offers stan-

dard quality.

 

S-Video offers the next best picture quality.

 

This format offers the best picture quality.

 

• If you select a format that is not supported by your TV, 

the setup menu may disappear from the screen. If this 
happens, switch off your equipment, connect the 
DV-SP506 to your TV with a composite video or 
S-Video cable, and then change this setting.

• When RGB is selected, nothing is output by the com-

ponent video output.

Depending on the HDMI Audio Out setting (see below), 
Audio menu settings may be fixed at a particular value, 
available for changing, or unavailable, as shown in the 
following table.

 

✓

 

: Available           

 

 ✗

 

: Unavailable

 

*1: Set automatically depending on the connected HDMI com-

ponent.

*2: When the Subwoofer setting is set to Off, this setting is 

fixed at Large.

*3: If the Front Speaker, Surround Speaker, or Center Speaker 

setting is set to Small, this setting can only be set to Small 
or Off.

*4: When the DV-SP506 is set to Standby, this setting is auto-

matically set to Off.

 

With this setting you can specify how the HDMI OUT 
outputs audio.

 

Audio is output at optimum quality.

 

SACD audio is output in DSD (Direct 

Stream Digital) format. If the HDMI input on your 
AV receiver or TV does not support DSD, there will 
be no sound. This option is also suitable for SACD 
playback via the multichannel analog audio output.

 

SACD audio is converted to 6-channel 

PCM with a sampling rate of 176.4 kHz. If the 
HDMI input on your AV receiver or TV does not 
support 6-channel PCM, there will be no sound. This 
option is also suitable for playback of 6-channel 
PCM on a DVD-Audio disc.

 

Multichannel audio is converted to 2-

channel PCM. Select this option to output the sound 
through your TV’s speakers without using an AV 
receiver. Dolby Digital and DTS will be converted to 
PCM.

 

Audio is not output by the HDMI OUT. Audio is 

output by the OPTICAL and COAXIAL digital out-
puts. Select this option if you’re using the analog or 
digital audio outputs to output audio instead of the 
HDMI OUT.

 

• While an SACD or DVD-Audio disc is loaded, this 

setting cannot be changed. Eject the disc first if you 
need to change this setting.

 

With this setting you can configure the type of audio sig-
nals output from the digital audio outputs. If your TV or 
AV receiver does not support Dolby Digital or DTS, 
select the PCM option.

 

Dolby Digital and DTS signals are out-

put as they are.

 

Dolby Digital and DTS signals are converted 

to Linear PCM. If your TV or AV receiver does not 
support Dolby Digital or DTS, select the PCM 
option.

 

No digital signals are output by the digital out-

puts.

 

• MPEG is output as PCM regardless of this setting.

 

*1

*1

*1

PCM

 

✓

 

*1

*1

*1

On

 

✓

 

On

On

On

 

✓

✓

 

Large

Large

Large

 

✓

✓

 

*2

 

Large

Large

Large

 

✓

✓

 

*3

 

Large

Large

Large

 

✓

✓

 

*3

 

Off

Off

Off

 

✓

✓

 

Off

Off

Off

 

✓

✓

 

Off

Off

Off

 

✓

✓

 

Off

Off

Off

 

✓

 

*4

 

✓

 

*4

 

Off

Off

Off

 

✓

✓

 

*1

DSD

PCM

PCM

 

✓

 

✗

✗

✗

✓

✓

DV-SP506_En.book Page 51 Friday, September 5, 2008 3:23 PM