Polycom VIEWSTATION EX Manual Do Utilizador
ViewStation EX, ViewStation FX, and VS4000 API Guide
206
www.polycom.com
Example
v35portsused 1+2
User Interface Screen Location
System Info>Admin Setup>Video Network>Video Network: V.35
Ports Used
Ports Used
This screen is only accessible if you have a
V.35/RS-449/RS-530/RS-366 network interface connected to your
system.
V.35/RS-449/RS-530/RS-366 network interface connected to your
system.
v35prefix <set|get> <"valid speed"> ["value"]
v35prefix set <"valid speed"> ["value"]
v35prefix set <"valid speed">
v35prefix get <"valid speed">
v35prefix set <"valid speed"> ["value"]
v35prefix set <"valid speed">
v35prefix get <"valid speed">
Description
This command sets the V.35/RS-449/RS-530/RS-366 dialing prefix.
It assumes that a profile has already been selected (see the
command v35profile on page 207).
It assumes that a profile has already been selected (see the
command v35profile on page 207).
set <
"
valid speed
"
>
Sets the V.35/RS-449/RS-530/RS-366 prefix when
followed by a value parameter. If you want to erase the
current setting, omit the parameter.
followed by a value parameter. If you want to erase the
current setting, omit the parameter.
valid speedValid speeds are: 56, 64, 2x56, 112, 2x64, 128, 168,
192, 224, 256, 280, 320, 336, 384, 392, 7x64, 504, 512,
560, 576, 616, 640, 672, 704, 728, 768, 784, 832, 840,
14x64, 952, 960, 1008, 1024, 1064, 1088, 1120, 1152,
1176, 1216, 1232, 1280, 1288, 21x64, 1400, 1408,
1456, 1472, 1512, 1536, 1568, 1600, 1624, 1664, 1680,
1728, 28x64, 1856, 1920, all. The parameter all lists all
the available speeds and their associated dialing
prefixes.
560, 576, 616, 640, 672, 704, 728, 768, 784, 832, 840,
14x64, 952, 960, 1008, 1024, 1064, 1088, 1120, 1152,
1176, 1216, 1232, 1280, 1288, 21x64, 1400, 1408,
1456, 1472, 1512, 1536, 1568, 1600, 1624, 1664, 1680,
1728, 28x64, 1856, 1920, all. The parameter all lists all
the available speeds and their associated dialing
prefixes.
v35prefix